|
Custom made from POLYURETHANE Square Stock
I have been asked by many carvers to create a "kit" that would allow them to make one single purchase and have enough material to cave the Hitty Doll or other items.
This "kit" contains the following items:
ONE 1 1/2 X 5 5/8" long SQUARE BLOCK
TWO 1/2 X 5 5/8" long SQUARE BLOCKS
This Polyurethane is easily turned on a lathe, it can be drilled, tapped and threaded. It is useful for DOLL BLANKS, Jewelry making, Scrimshaw, Custom Inlay, Pen Blanks, Reel Seats, Custom Knobs,
While this material does cut easily, I would suggest rough shaping be done with a Dremel to save time. Always wear a proper dust mask when sanding or power shaping ANY medium.
We offer squares from 2 inches down to 1/2 inch AND Cylinders from 2 inches down to 1/2 inch..
PLEASE NOTE:
The dolls shown in this listing are for reference only and are not part of the listing. The dolls were carved by master artists Jenny Anderson and Connie Hardt and represent the first and second ever creations using my Polyurethane.
The reference photo showing the block of Mastadon Ivory and the rough torso carving was Ms. Andersons reference to her inability to tell the dfference between the two mediums.
Assembly of component parts is best accomplished with either Hobby grade CA Glue or Epoxy.
This material works easily and will polish very nicely with 3M automotive refinishers polish. It has the look and feel of real BONE, not plastic. It has a tensile strength of 3200 PSI and a hardness index of 70D. Simply put, it will not break or shatter on impact.
All my listings are set to Auto Re-list. If you want more than one of a certain item, make the purchase, but DO NOT PAY, wait a moment and the listing will reappear. Simply make the second purchase but again, do not pay. I will send a combined invoice.
Please see my store listings for OVER 30 Knife Scales, Cylinders and other Poly products as well as many CUSTOM IMPRINTED ITEMS.
This is a custom made item. As you read this listing, it does NOT exist. It will be created to your specifications after your purchase. Any photo in ANY of my listings represents the prototype of the ORIGINAL. Because this is a custom made item, eBay policy allows you to have choices in color. Please email me with your specifications in color and I will create the item for you.
Your choices are: Natural Ivory, Aged Ivory.
The color shown in this listing is Natural Ivory. If you do not specify a color choice, you will receive the default color.
Each item is poured to order. The average turn around time is 10 business days from receipt of payment.
I have added a photo to show the color difference between Aged Ivory, which is about the color of butter and Natural Ivory which is about an Egg Shell/Navajo White. Depending on your monitor or my photo service, the item you receive may look slightly different in color from the listing photo.
TIPS & TRICKS
(ONE) I have a way to age this material further that you can do at home. You are in control and it is fun to try various "looks" to the age of the Poly. The good news is that it doesn't damage the item and is completely removable if the results aren't to your liking. All it takes is some paper towels and a small amount of Ochre, yellow/brown or Golden color acrylic water based paint, available at any Wall Mart store in the crafts section. After final sanding and before any wax etc is applied to the grip, place a drop or two of the color on a folded paper towel. Gently rub the color over the face of the item. (The longer the paint sits on the surface the darker it will be in the final stages, a little is best, you can always add more). Buff away the excess with another folded towel. Want some streaks??? OK, just add a tiny drop of brown to a small amount of your base color. Apply the mix to a Q-Tip and streak away. When you are happy with the look, "Burnish" (rub the surface quickly and with some pressure) with another folded paper towel. Sit back and admire your creation. Not good enough?? OK, sand it off with some 3M 400 grit wet/dry sandpaper, used wet, available in any DIY store and start again. Once you are satisfied with the coloration, and have painted all the details of your creation, a thick coat or two of a good quality paste wax will protect the finish. The wax can be applied with another folded paper towel and the last coat "burnished" for a very nice gloss.
(TWO) This Poly responds well to being glued using many different forms of adhesive. Some methods I have used are: Hobby grade CA Glue, Gorilla glue, Quick Set Epoxy and Contact cement.
(THREE) The Poly will respond well to any water based acrylic paint if you would like to create a different ethnic look for your doll. The paint will penetrate the pores of the Poly and form a very durable finish.
|
